Product Description

HOW DOES THE IRON BREAKER WITH CLACK WS1EA WORK? 

During system regeneration, an air pocket is created when air is drawn in through an air injector located in the brine port. During service, untreated water passes through the air pocket oxidizing any iron, hydrogen sulfide, and manganese present into physical particles. Those particles are ultimately trapped in the filter media bed. Once the air pocket is depleted and the particles are filtered out, they system’s regeneration cycle refreshes the bed and replaces the oxygen head, allowing the process to begin again.

  • Superior filtration for iron, manganese and hydrogen sulfite removal
  • Uses air to precipitate iron manganese and hydrogen sulfide (rotten egg smell)
  • Fully adjustable control delivers upflow backwash, air recharge, rapid rinse and downflow service
  • Time-tested, hydraulically-balanced piston, seal and spacer control service flow and backwash Non-corrosive, fiber-reinforced polymer construction 
  • Backwash capacity handles tanks up to 16″ diameter for filter applications
  • Periodic automatic backwash keeps the media clean
  • Reduces salt consumption if installed ahead of the water softener 
  • Removes up to 8 ppm of Hydrogen Sulfide and up to 7 ppm of Iron
  • Protects pipes, plumbing fixtures and home appliances
  • Eliminates rust stains in tubs, sinks, and toilets 
  • Crystal clear, non-staining water
  • Uses no chemicals
  • Inexpensive operation and simple design,
  • Safe for septic beds
  • RO Pre-treatment
  • Residential and light commercial applications
  • Well water applications
  • Resin Tank Size: 10″ x 54″
  • Clack by-pass valve
  • Brass lead free connectors 3/4″
  • Gravel under bed: 0.3 cu ft
  • Media: 1.0 cu ft. of Katalox-Light revolutionary filtration media made in Germany
  • Clack WS1EA Valve
  • Height: 65″
  • Max. Diameter: 10″
  • Approx. Weight: 80 lbs.