Toll free: 855-231-AQUA(2782) | ON: (416) 576-9920|info@atipure.com
Everpure H104 System

Everpure® H104 System

$480.80

Everpure® – The Professional Choice for Water You Can Trust.

  • Reduces up to 99% of lead (with H series).
  • Exclusive precoat design reduces up to 99.99% of particles 1/2 micron and larger in size including Cryptosporidium.
  • Reduces asbestos fibers, dirt, chlorine taste and odor, mold and algae.
  • Scale inhibitor blended into the Micro-Pure® material reduces mineral build-up in water using appliances.
  • Conveniently hides under the sink.
  • Quick installation and cartridge replacement is sanitary and as easy as changing a light bulb.

Product Description

 

Product Specification
    
Installation Guide

  • Reduces Lead to below the Federal Action Level of 15 ppb
  • Reduces Asbestos fibers
  • Reduces Cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum
  • Reduces Volatile Organic Chemicals (VOCs), including THMs
  • Also reduces:
    • Chlorine taste and odor
    • Chloramine
    • Dirt and cloudiness
    • Mold and algae
    • Oxidized iron
    • Oxidized manganese
    • Oxidized sulfides
    • Particles 1/2 micron and larger in size
  • Reduces Limescale build-up in appliances that use water
  • Sanitary cartridge replacement is simple, quick and clean, Internal filter parts are never exposed to handling or contamination
  • NSF Certified under NSF/ANSI Standards 42 and 53

  • Service flow rate: maximum 0.5 gpm (1.9 Lpm)
  • Pressure Requirements: 10 psi – 125 psi (0.7 – 8.6 bar), non-shock
  • Maximum Temperature: 35°F – 100°F(2-38°C)
  • No electrical connection required

Installation Tips

  • Space required: 5″x5″x22″ (13x13x56cm) including 2-1/2 inches of clear space under unit for cartridge change.
  • Install vertically with cartridge hanging down.
  • Never use saddle valve for connection
  • Use 3/8″ water line and minimum length of tubing possible.
  • Flush new cartridge at full flow for three minutes to purge air.

Operation Tips

  • Change cartridges at least annually.
  • Change cartridges when capacity is reached or when pressure falls below 10 psi
  • Service flow rate must not exceed 0.5 gpm
  • Always flush the filter cartridge at time of installation and cartridge change