Toll free: 855-231-AQUA(2782) | ON: (416) 576-9920|info@atipure.com

Everpure® S100 Replacement Cartridge

Everpure-S-100 Cartridge

Everpure® S100 Replacement Cartridge

$70.00

Everpure® – The Professional Choice for Water You Can Trust.

  • Reduces up to 99% of lead (with H series).
  • Exclusive precoat design reduces up to 99.99% of particles 1/2 micron and larger in size including Cryptosporidium.
  • Reduces asbestos fibers, dirt, chlorine taste and odor, mold and algae.
  • Scale inhibitor blended into the Micro-Pure® material reduces mineral build-up in water using appliances.
  • Conveniently hides under the sink.
  • Quick installation and cartridge replacement is sanitary and as easy as changing a light bulb.

Product Description

  • Finely polishes treated water to premium quality for drinking and cooking.
  • Reduces chlorine taste and odor.
  • Reduces dirt, rust, asbestos fibers, and other particulates such as oxidized iron, manganese, and sulfides.
  • Reduces parasitic protozoan cysts such as Giardia, Entamoeba, Cryptosporidium.
  • Reduces common earth, moldy, fishy tastes and odors.
  • Sanitary cartridge replacement is simple, quick and clean, Internal filter parts are never exposed to handling or contamination
  • NSF Certified under NSF/ANSI Standards 42 and 53
  • The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42 and 53.
  • For drinking and cooking at home or office.
  • Capacity: 1,500 gallons (5,670 liters)
  • Height of cartridge body: 12.75″
  • Overall Dimensions: 14.5″H x 3.25″Ø
  • Service flow rate: maximum 0.5 gpm (1.9 Lpm)
  • Pressure Requirements: 10 psi – 125 psi (0.7 – 8.6 bar), non-shock
  • Maximum Temperature: 35°F – 100°F(2-38°C)
  • No electrical connection required

Installation Tips

  • Space required: 5″x5″x20″ (13x13x51cm) including 2-1/2 inches of clear space under unit for cartridge change.
  • Install vertically with cartridge hanging down.
  • Never use saddle valve for connection
  • Use 3/8″ water line and minimum length of tubing possible.
  • Flush new cartridge at full flow for three minutes to purge air.

Operation Tips

  • Change cartridges at least annually.
  • Change cartridges when capacity is reached or when pressure falls below 10 psi
  • Service flow rate must not exceed 0.5 gpm
  • Always flush the filter cartridge at time of installation and cartridge change

 

A full year warranty against defects in material and workmanship is provided by the manufacturer.